Hardware test
Mouse DPI Test
Lay a ruler next to your mouse, press Start, then hold the left button and move the mouse exactly the distance you entered. The test counts the movement your sensor reports over that distance, which is its real DPI. Three or four runs give a reliable average.
Updated · Runs in your browser, nothing is uploaded
Press Start. Your pointer will be hidden until you press Esc.
Needs a mouse: a touchpad has no fixed DPI to measure.
How to get an accurate reading
- Use a real ruler or tape on the mouse pad, and line up the front edge of the mouse (or the sensor, which is usually in the middle) with the zero mark.
- Move in a straight line without lifting the mouse. Slow is fine. The test measures distance, not speed.
- Use a long distance. Four inches or ten centimeters is a good minimum. Being a millimeter off matters much less over a long stroke.
- Do three or four runs and look at the spread. If the runs disagree by more than about 3%, the strokes weren't the same length.
Is your DPI accurate?
Sensors are rarely exact. Being within about 5% of the set value is normal, and many good mice are within 2 to 3%. A larger deviation isn't a fault in itself: what matters for aim is that the mouse stays consistent, and that you know its real value when you match sensitivity between mice or games. A result that changes a lot from run to run on the same surface is a different matter. That points at a dirty sensor or a surface the sensor doesn't track well.
| Result | What it means |
|---|---|
| Within 5% of the set DPI | Normal sensor tolerance. |
| 5 to 10% off, consistent between runs | The sensor runs high or low. Adjust the set DPI to land on the value you want. |
| Off by about 1.25×, 1.5× or 2× | A software setting is scaling the movement: display scaling, a pointer speed other than the default, or acceleration. See below. |
| Runs disagree by more than 5% | Uneven strokes, or a sensor losing tracking. Clean the sensor window and try another surface. |
Questions
Do Windows pointer speed and "Enhance pointer precision" affect the result?
Not in Chrome or Edge: the test asks for the mouse's unadjusted movement, which skips both. Browsers that can't provide it (the page tells you) measure the movement after Windows or macOS has processed it. For those, set pointer speed to the middle notch (6 of 11 on Windows), turn off "Enhance pointer precision", and expect macOS results to be unreliable because macOS always applies acceleration.
Why does the result look scaled by my display scaling?
Some browser versions report pointer-locked movement in scaled screen units. When your display scaling isn't 100%, the page also shows the result multiplied by the scaling factor; if that one matches the DPI you set, it's the one to trust.
What's the difference between DPI and CPI?
Nothing in practice. CPI (counts per inch) is the more accurate term because a mouse doesn't print dots, but manufacturers and games mostly say DPI.
What DPI should I use?
Most players in shooters use 400 to 1600 DPI and set the final sensitivity in the game. Higher DPI isn't more precise on its own; it just moves the cursor further per inch. On a large 4K desktop, 1600 to 3200 saves wrist movement.