Hardware test

Double Click Test

Click the test area once at a time, slowly, about 30 times. A click that arrives within a few dozen milliseconds of the one before can't come from your finger, so it is flagged. One flag in 30 slow clicks is enough to show the switch is chattering.

Updated · Runs in your browser, nothing is uploaded

Click here once at a time, slowly.
Your own double clicks are counted separately; only presses too fast for a finger are flagged.

0Clicks
0Double clicks you made
0Too fast for a finger (switch fault)
–Gap since the last press

How the test decides

For every press we measure the time since the previous press of the same button. Clicking on purpose, even fast, rarely gets under about 100 ms between presses. A chattering switch adds a second press only a few milliseconds after the real one, because the worn contact bounces open and closed. Anything faster than the limit you set (80 ms by default) is flagged in red in the log.

Click slowly while you test. If you deliberately double-click, those pairs can land under the limit and be flagged too. If you are a fast clicker, lower the limit to 50 or 60 ms.

If your mouse double clicks

  1. Raise the debounce time in the mouse software if it has the setting (Logitech, Razer, SteelSeries and others often call it debounce or click response). A few extra milliseconds hides mild chatter.
  2. Clean the switch. A short blast of compressed air into the button gap, while clicking it, helps when dust or a little oxidation is the cause. It is usually a temporary fix.
  3. Check the warranty. Double clicking is a known failure, and most major brands replace mice that do it inside the warranty period.
  4. Replace the switch if you can solder, or move to a mouse with optical switches. Those register a click with a light beam instead of a metal contact, so they can't chatter this way.

Keyboard keys

Switch to Keyboard and tap a key that has been typing double letters, one tap at a time. Holding a key down isn't counted, so auto-repeat won't trigger flags. Keyboard chatter has the same cause and the same fixes: cleaning, a debounce setting in the keyboard software, or a new switch on a hot-swappable board.

Questions

How many clicks should I test?

Thirty to fifty slow clicks per button. Chatter is often intermittent, so a short test can miss it. If you never see a flag but the problem happens in games, test again after the mouse has been in use for a while.

Can a wireless connection cause double clicks?

Rarely. Interference makes a wireless mouse stutter or drop clicks; it doesn't usually invent extra ones. A flag here points at the switch whichever way the mouse connects.

Does the Windows double-click speed setting matter?

No. That setting only decides how far apart two clicks may be for Windows to treat them as a double-click. It doesn't change what the mouse sends, which is what this test measures.