Hardware test

Mouse Polling Rate Test

Move the mouse in quick, steady circles inside the box for a few seconds. The test counts how many position reports arrive each second, which is the polling rate your mouse is actually delivering: about 1000 Hz for most gaming mice, 125 Hz for many office mice.

Updated · Runs in your browser, nothing is uploaded

Measuring with: checking browser…

Move your mouse in fast circles here

–Right now
–Average while moving
–Highest reading
–Nearest standard rate

What polling rate means

The polling rate is how often the mouse reports its position to the computer. At 125 Hz a report goes out every 8 ms, at 1000 Hz every 1 ms. Faster reporting makes the cursor track a fast movement more closely and trims a few milliseconds of delay, which is why gaming mice default to 1000 Hz and some now offer 2000, 4000 or 8000 Hz.

Polling rateTime between reportsTypical mice
125 Hz8 msBasic office mice, many Bluetooth mice
500 Hz2 msOlder gaming mice, power-saving modes
1000 Hz1 msMost gaming mice, wired or on a 2.4 GHz dongle
2000–8000 Hz0.5–0.125 msHigh-end esports mice, usually with a special dongle

Why your reading may be lower than the box says

  • You moved too slowly. A mouse only reports when it moves. Slow or stopping movements give low readings, so look at the highest reading after a few fast circles.
  • Bluetooth. Most mice drop to about 125 Hz, sometimes less, over Bluetooth. Use the USB dongle for full speed.
  • Interference or distance. Dips in the graph on a wireless mouse usually mean the dongle is too far away or behind the PC case. A short USB extension that puts the dongle near the mouse often fixes it.
  • Power saving. Some wireless mice lower the rate on low battery.
  • Very high rates. At 4000 and 8000 Hz the operating system and the browser can merge reports, so this test and most others read low. Trust the setting in the mouse software for those, and use this test to confirm the rate holds steady.

Can a website measure mouse latency?

Not end to end. A page only learns about a click once the computer has already received and processed it, so it can't see the time between your finger pressing the button and the signal leaving the mouse. Measuring that takes a camera or a light sensor on the screen. What a polling rate test can tell you is the reporting interval, which sets a floor on how late a movement can arrive: 8 ms at 125 Hz, 1 ms at 1000 Hz.

Questions

Which browser gives the most accurate result?

Chrome and Edge. They deliver every mouse report to the page as it arrives. Firefox reports them in batches with their own times, which also works. Safari tends to report movement once per screen refresh, so the reading there tops out near your monitor's refresh rate.

Is a higher polling rate always better?

Up to 1000 Hz the difference is easy to feel in fast games. Above that the gains are small and cost battery life and CPU time, and some older games stutter at 4000 or 8000 Hz. For office work 125 or 500 Hz is plenty.

How do I change my mouse's polling rate?

In the manufacturer's software (Logitech G Hub, Razer Synapse, SteelSeries GG and so on), or with a button on the underside on some mice. Office mice usually have a fixed rate.